آموزش مهارت های امنیت CCNA 2017 200-125 به صورت Boot Camp

Telegram_GEEKBOY

CCNA Security (سی سی ان در شاخه امنیت) نمایانگر دانش و مهارت مقدماتی فرد جهت ایمن سازی شبکه های مبتنی بر سیسکو می باشد. با اخذ مدرک CCNA Security، متخصص شبکه قابلیت لازم جهت طراحی زیر ساخت امن، تشخیص تهدیدات و آسیب پذیری ها و رفع آن ها را کسب می نماید. بخش عمده این دوره بر روی فناوری های اصلی مرتبط با ایمن سازی، نصب و عیب یابی و مانیتورینگ شبکه در راستای حفظ تمامیت، محرمانگی و قابل دسترس بودن اطلاعات و تجهیزات و کارآمدی تکنولوژی های سیسکو در این زمینه تمرکز دارد. شرکت CISCO سه سطح از مدارک را جهت متخصصین IT در نظر گرفته (آشنائی (Associate)، متخصص (professional)، سطح مهارت عالی (Expert)) که دارای ابعاد متفاوتی برای بر آوردن نیاز و تقاضای افراد مختلف است.

Udemy - آموزش مهارت های امنیت CCNA 2017 200-125 به صورت Boot Camp
در دوره آموزشی Udemy CCNA 2017 200-125 Video Boot Camp با امنیت سی سی ان ای در شبکه با شماره آزمون 125-200 آشنا می شوید.

 

 

Get ready to earn your CCNA and CCNA Security certifications with the best offer I’ve ever made on the #1 best-selling CCNA course on Udemy – and it’s also the highest-rated CCNA course here!

The ICND1 material is totally refreshed, and the ICND2 refresh is on. That has resumed after my bout with the flu, and that’ll finish in the next 30 days (today being March 6, that is). The day after the CCNA refresh is done, I’ll start with the CCNA Security course, and you’ll get that right here, absolutely free, as the videos are created.

That includes my famous subnetting material and my BGP material – and I’ll make BGP clearer for you than any other instructor or course in the world. You have my guarantee on that.

I’ve also left the 200-120 videos up so you can get a head start on any topic. There are very few changes from the 200-120 to the 200-125. Some people have even passed the new exam with the 200-120 videos here!

Sign up now and earn the two most important Cisco certifications there are for one low price – and join over 39,000 students in the best-selling CCNA course on Udemy!

You receive immediate, full access to all 27+ hours of the course, and you can stream them or download them anytime you like.

You’ll have permanent online access to watch the videos whenever you like as well, and there’s a Q&A forum right here on Udemy where you can post questions – and I’ll answer them personally!

From my unbeatable, trick-free methods of teaching you how to perform binary, hex, and decimal conversions all the way through tough OSPF and EIGRP configs, you’ll see it all right here on LIVE Cisco routers and switches – and you can watch every single session as often as you like.

Thanks for making The Bryant Advantage part of your CCNA success story! Let’s get started on your CCNA!
Curriculum:
– CCNA 200-125 Video Boot Camp Preview!
– CCNA 200-125, ICND1, Sec 1: Supermodels! (Network Supermodels, That Is)
– CCNA 200-125, ICND1, Sec. 2: Ethernet And Cabling
– CCNA 200-125, ICND1, Sec. 3: Hubs, History, and Why Hubs Are History
– CCNA 200-125, ICND1, Sec 4: Config Modes, IOS Help, Intro To VLANs
– CCNA 200-125, ICND1, Sec. 5: Memories, Boots, and Passwords
– CCNA 200-125, ICND1: IP Addressing, Binary, and Intro To Routing
– CCNA 200-125, ICND1: Switches, Default Gateways, Telnet, And More!
– CCNA 200-125, ICND1: TCP and UDP
– CCNA 200-125, ICND1: DHCP, DNS, And ARP
– CCNA 200-125, ICND1: Static Routing, Pings, And Hub-And-Spoke Networks
– CCNA 200-125, ICND1: Distance Vector In General, RIPv2 In Particular
– CCNA 200-125, ICND 1 and 2 — Subnetting Success!
– CCNA 200-125, ICND 1: Access Lists
– CCNA 200-125, ICND 1: The Network Time Protocol
– CCNA 200-125, ICND1: NAT and PAT
– CCNA 200-125, ICND1: IP Version 6
– CCNA 200-125, ICND1 *and* 2: This And That
– CCNA 200-125, ICND2: VTP (VLAN Trunking Protocol)
– CCNA 200-125, ICND2: The Spanning Tree Protocol
– CCNA 200-125 (ICND2): Etherchannels
– The Rapid Spanning-Tree Protocol
– CCNA 200-125 (ICND2): OSPF
– CCNA 200-125, ICND2: EIGRP
– OSPFv3 — OSPF For IPv6!
– CCNA 200-125 (ICND2): First-Hop Redundancy Protocols
– CCNA 200-125 (ICND2): PTP WANs, VPNs, and GRE
– CCNA 200-125 (ICND2): Fun With L3 Switches (Mostly)
– CCNA 200-125 (ICND2): Surviving Quality Of Service
– Network Monitoring
– CCNA 200-125 (ICND2): Cloud Computing and Software-Defined Networking
– CCNA 200-125 (ICND2): IPv6 ACLs
– CCNA 200-125 (ICND2): The Border Gateway Protocol
– CCNA Security 210-260: The Enemies Within
– CCNA Security 210-260: SIte-to-Site VPNs
– All Sections Down Are From Previous Course — Still Great Study Material!
– 200-120 Networking Fundamentals (ICND1)
– 200-120 Ethernet (ICND1)
– 200-120 Switching 101 (ICND1)
– 200-120 A Quick WAN Introduction (ICND 1)
– 200-120 Routing and IP Addressing Fundamentals (ICND 1)
– 200-120 Cisco Configs, Memory, and More! (ICND 1)
– 200-120 DNS, ARP, and DHCP (ICND 1)
– 200-120 Passwords, Banners, Telnet, and More! (ICND 1)
– 200-120 Static Routing And A Little DV (ICND 1)
– 200-120 OSPF And Link-State Protocols (ICND 1)
– 200-120 ACLs and NTP (ICND 1)
– 200-120 Route Summarization (ICND 1)
– 200-120 NAT ‘n PAT — Network Address Translation (ICND 1)
– 200-120 IP Version 6 (ICND 1)
– 200-120 Router On A Stick And L3 Switching (ICND 1)
– 200-120 Binary, Subnetting, VLSM, and Hex (ICND 1 And 2)
– 200-120 More Switching! (ICND 2)
– 200-120 Wide Area Networks (ICND 2)
– 200-120 First-Hop Redundancy Protocols (ICND 2)
– 200-120 VPNs (ICND 2)
– 200-120 OSPF (ICND 2)
– CCNA 200-120 (ICND 2): The Border Gateway Protocol
– 200-120 EIGRP (ICND 2)
– More IPV6! (ICND 2)

The Cisco Certified Network Associate (CCNA) Routing and Switching composite exam (200-125) is a 90-minute, 50–60 question assessment that is associated with the CCNA Routing and Switching certification. This exam tests a candidate’s knowledge and skills related to network fundamentals, LAN switching technologies, IPv4 and IPv6 routing technologies, WAN technologies, infrastructure services, infrastructure security, and infrastructure management.

The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

This exam tests a candidate’s knowledge and skills related to network fundamentals, LAN switching technologies, IPv4 and IPv6 routing technologies, WAN technologies, infrastructure services, infrastructure security, and infrastructure management.

1.0 Network Fundamentals

1.1 Compare and contrast OSI and TCP/IP models
1.2 Compare and contrast TCP and UDP protocols
1.3 Describe the impact of infrastructure components in an enterprise network
1.3.a Firewalls
1.3.b Access points
1.3.c Wireless controllers
1.4 Describe the effects of cloud resources on enterprise network architecture
1.4.a Traffic path to internal and external cloud services
1.4.b Virtual services
1.4.c Basic virtual network infrastructure
1.5 Compare and contrast collapsed core and three-tier architectures
1.6 Compare and contrast network topologies
1.6.a Star
1.6.b Mesh
1.6.c Hybrid
1.7 Select the appropriate cabling type based on implementation requirements
1.8 Apply troubleshooting methodologies to resolve problems
1.8.a Perform and document fault isolation
1.8.b Resolve or escalate
1.8.c Verify and monitor resolution
1.9 Configure, verify, and troubleshoot IPv4 addressing and subnetting
1.10 Compare and contrast IPv4 address types
1.10.a Unicast
1.10.b Broadcast
1.10.c Multicast
1.11 Describe the need for private IPv4 addressing
1.12 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment
1.13 Configure, verify, and troubleshoot IPv6 addressing
1.14 Configure and verify IPv6 Stateless Address Auto Configuration
1.15 Compare and contrast IPv6 address types
1.15.a Global unicast
1.15.b Unique local
1.15.c Link local
1.15.d Multicast
1.15.e Modified EUI 64
1.15.f Autoconfiguration
1.15.g Anycast

2.0 LAN Switching Technologies

2.1 Describe and verify switching concepts
2.1.a MAC learning and aging
2.1.b Frame switching
2.1.c Frame flooding
2.1.d MAC address table
2.2 Interpret Ethernet frame format
2.3 Troubleshoot interface and cable issues (collisions, errors, duplex, speed)
2.4 Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple switches
2.4.a Access ports (data and voice)
2.4.b Default VLAN
2.5 Configure, verify, and troubleshoot interswitch connectivity
2.5.a Trunk ports
2.5.b Add and remove VLANs on a trunk
2.5.c DTP, VTP (v1&v2), and 802.1Q
2.5.d Native VLAN
2.6 Configure, verify, and troubleshoot STP protocols
2.6.a STP mode (PVST+ and RPVST+)
2.6.b STP root bridge selection
2.7 Configure, verify and troubleshoot STP related optional features
2.7.a PortFast
2.7.b BPDU guard
2.8 Configure and verify Layer 2 protocols
2.8.a Cisco Discovery Protocol
2.8.b LLDP
2.9 Configure, verify, and troubleshoot (Layer 2/Layer 3) EtherChannel
2.9.a Static
2.9.b PAGP
2.9.c LACP
2.10 Describe the benefits of switch stacking and chassis aggregation

3.0 Routing Technologies

3.1 Describe the routing concepts
3.1.a Packet handling along the path through a network
3.1.b Forwarding decision based on route lookup
3.1.c Frame rewrite
3.2 Interpret the components of a routing table
3.2.a Prefix
3.2.b Network mask
3.2.c Next hop
3.2.d Routing protocol code
3.2.e Administrative distance
3.2.f Metric
3.2.g Gateway of last resort
3.3 Describe how a routing table is populated by different routing information sources
3.3.a Admin distance
3.4 Configure, verify, and troubleshoot inter-VLAN routing
3.4.a Router on a stick
3.4.b SVI
3.5 Compare and contrast static routing and dynamic routing
3.6 Compare and contrast distance vector and link state routing protocols
3.7 Compare and contrast interior and exterior routing protocols
3.8 Configure, verify, and troubleshoot IPv4 and IPv6 static routing
3.8.a Default route
3.8.b Network route
3.8.c Host route
3.8.d Floating static
3.9 Configure, verify, and troubleshoot single area and multi-area OSPFv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
3.10 Configure, verify, and troubleshoot single area and multi-area OSPFv3 for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
3.11 Configure, verify, and troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub)
3.12 Configure, verify, and troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub)
3.13 Configure, verify, and troubleshoot RIPv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution)
3.14 Troubleshoot basic Layer 3 end-to-end connectivity issues

4.0 WAN Technologies

4.1 Configure and verify PPP and MLPPP on WAN interfaces using local authentication
4.2 Configure, verify, and troubleshoot PPPoE client-side interfaces using local authentication
4.3 Configure, verify, and troubleshoot GRE tunnel connectivity
4.4 Describe WAN topology options
4.4.a Point-to-point
4.4.b Hub and spoke
4.4.c Full mesh
4.4.d Single vs dual-homed
4.5 Describe WAN access connectivity options
4.5.a MPLS
4.5.b Metro Ethernet
4.5.c Broadband PPPoE
4.5.d Internet VPN (DMVPN, site-to-site VPN, client VPN)
4.6 Configure and verify single-homed branch connectivity using eBGP IPv4 (limited to peering and route advertisement using Network command only)
4.7 Describe basic QoS concepts
4.7.a Marking
4.7.b Device trust
4.7.c Prioritization
4.7.c. [i] Voice
4.7.c. [ii] Video
4.7.c. [iii] Data
4.7.d Shaping
4.7.e Policing
4.7.f Congestion management

5.0 Infrastructure Services

5.1 Describe DNS lookup operation
5.2 Troubleshoot client connectivity issues involving DNS
5.3 Configure and verify DHCP on a router (excluding static reservations)
5.3.a Server
5.3.b Relay
5.3.c Client
5.3.d TFTP, DNS, and gateway options
5.4 Troubleshoot client- and router-based DHCP connectivity issues
5.5 Configure, verify, and troubleshoot basic HSRP
5.5.a Priority
5.5.b Preemption
5.5.c Version
5.6 Configure, verify, and troubleshoot inside source NAT
5.6.a Static
5.6.b Pool
5.6.c PAT
5.7 Configure and verify NTP operating in a client/server mode

6.0 Infrastructure Security

6.1 Configure, verify, and troubleshoot port security
6.1.a Static
6.1.b Dynamic
6.1.c Sticky
6.1.d Max MAC addresses
6.1.e Violation actions
6.1.f Err-disable recovery
6.2 Describe common access layer threat mitigation techniques
6.2.a 802.1x
6.2.b DHCP snooping
6.2.c Nondefault native VLAN
6.3 Configure, verify, and troubleshoot IPv4 and IPv6 access list for traffic filtering
6.3.a Standard
6.3.b Extended
6.3.c Named
6.4 Verify ACLs using the APIC-EM Path Trace ACL analysis tool
6.5 Configure, verify, and troubleshoot basic device hardening
6.5.a Local authentication
6.5.b Secure password
6.5.c Access to device
6.5.c. [i] Source address
6.5.c. [ii] Telnet/SSH
6.5.d Login banner
6.6 Describe device security using AAA with TACACS+ and RADIUS

7.0 Infrastructure Management

7.1 Configure and verify device-monitoring protocols
7.1.a SNMPv2
7.1.b SNMPv3
7.1.c Syslog
7.2 Troubleshoot network connectivity issues using ICMP echo-based IP SLA
7.3 Configure and verify device management
7.3.a Backup and restore device configuration
7.3.b Using Cisco Discovery Protocol or LLDP for device discovery
7.3.c Licensing
7.3.d Logging
7.3.e Timezone
7.3.f Loopback
7.4 Configure and verify initial device configuration
7.5 Perform device maintenance
7.5.a Cisco IOS upgrades and recovery (SCP, FTP, TFTP, and MD5 verify)
7.5.b Password recovery and configuration register
7.5.c File system management
7.6 Use Cisco IOS tools to troubleshoot and resolve problems
7.6.a Ping and traceroute with extended option
7.6.b Terminal monitor
7.6.c Log events
7.6.d Local SPAN
7.7 Describe network programmability in enterprise network architecture
7.7.a Function of a controller
7.7.b Separation of control plane and data plane
7.7.c Northbound and southbound APIs

اگر شما نیز به رشد دانش خود و به اشتراک گزاری آن با دیگران علاقه مندید می توانید به ما بپیوندید
منبع p30download
2 نظرات
  1. بهنام می گوید

    اموزش به زبان فارسی هستش یا انگلیسی ؟

    1. سعید می گوید

      سلام
      انگلیسی

ارسال یک نظر

آدرس ایمیل شما منتشر نخواهد شد.

این سایت از اکیسمت برای کاهش هرزنامه استفاده می کند. بیاموزید که چگونه اطلاعات دیدگاه های شما پردازش می‌شوند.